home *** CD-ROM | disk | FTP | other *** search
- Mouse Driver for Windows 3.0
-
- BETA VERSION - Mouse Systems does not warrant the functionality,
- compatibility or performance of these beta drivers. Although they
- have been tested in-house, there are no guarantees, stated or implied,
- for these drivers.
-
- A. Driver Files
-
- There are 2 drivers for Mouse Systems Mice and Windows 3.0:
-
- 3MSCWIN3.DRV - driver for 3-button protocol mouse on bus card.
-
- 2MSCWIN3.DRV - driver for 2-button protocol mouse (or PC Trackball
- on COM ports or bus card.
-
- B. Installation
-
- To install the above drivers,
-
- 1. change directory to your "Windows" directory and type
-
- SETUP <ENTER>
-
- 2. use UP cursor key to select "Mouse:" on the 1st SETUP screen
- and press <ENTER>
-
- 3. use DOWN cursor key to select "Other" on the 2nd SETUP screen
- and press <ENTER>
-
- 4. SETUP will now display the default drive and directory where
- Windows mouse driver(s) can be found. If you have copied the
- drivers to your hard disk, type the drive and directory where
- you copied the drivers and press <ENTER>. If the driver files
- are on a floppy disk, insert it to driver A: and press <ENTER>.
-
- 5. SETUP displays the description of the 2 drivers:
-
- Mouse Systems 2 Button Mouse, BUS VERSION
- Mouse Systems 3 Button Mouse on Bus Card #1
-
- use the cursor keys to select the driver you need and press <ENTER>.
-
- 6. select "Complete Changes:" and press <ENTER>.
-
- SETUP will copy the driver file and modify your SYSTEM.INI file
- automatically.
-
- C. Restrictions
-
- These drivers work only on IRQs 2, 3, 4, 5, 7.
-
-
- D. Additional Mouse Drivers
- The new DOS mouse drivers, MSCMOUSE.COM and MSCMOUSE.SYS, version 6.23
- were also included on this disk. These drivers may be required if
- running a non-windows application in full-screen mode. Either of the
- drivers may be installed as follows:
-
- MSCMOUSE.COM - copy the MSCMOUSE.COM file to your hard disk. Insert
- the command: \MSCMOUSE into your autoexec.bat file
-
- MSCMOUSE.SYS - copy the MSCMOUSE.SYS file to your hard disk. Insert
- the line: DEVICE=\MSCMOUSE.SYS into your config.sys file